No matter if it's a slight blemish or a completely damaged bath, the professionals at Bath Fixer Bow are equipped to perform a sink, shower, or bath chip repair and recondition worn-out bathroom fixtures through a money-saving option to extend the life of your bath.
Bath surfaces, sinks, and shower trays frequently suffer wear and tear from accidental impacts. This can cause the surface to crack or chip, but don’t take this as a sign to replace the bath or basin.
Our team has years of expertise in repairing hard surfaces, focusing on:
Basin Repairs
Wood Flooring Repair
Worktops Repair
Wooden Worktops Repair
Wooden Frames Repair
Why Choose Bath Fixer?
We at Bath Fixer are equipped to perform high-quality damage repair solutions on all types of doors, wooden, laminate, and tiled floors, kitchen and bathroom countertops, baths, fiberglass and acrylic shower trays, tiles, window frames and cills, tables, cabinets, and wooden fixtures, and various additional fixtures in Kingston-upon-Thames.
Aged enamel-coated baths tend to become porous and tough to scrub over time.
Once this occurs, it’s time for the professionals at Bath Fixer Bow to apply our tub refinishing process.
Plastic-based bathtubs over time lose their original shine, thus making your bathroom look tired.
If you’re looking for a professional restoration for an enamel bath or an acrylic bath repair, with Bath Fixer Bow, your beautifully restored bathtub is ensured to stay pristine for many more years.
Our specialists at Bath Fixer Bow can rejuvenate the appearance of your bathtub for much less than replacement with our specialized bath resurfacing and repair service.
Resurfacing is a perfect solution for a wide range of tubs, whether it's lightweight acrylic baths and enamel to vintage cast iron bathtubs and reinforced fiberglass baths.
The technique we use is compatible with all materials, so we can resurface and reglaze on any type of bathroom suite.
Whether fixing acrylic tubs to cast iron bath resurfacing, the completed work will have your worn-out bathtub looking like new again.
Bath Fixer Bow’s restoration services has helped our customers spend less than 40% compared to buying a new one by avoiding a full bathtub installation.
Through reglazing, we eliminate surface damage and blemishes, and seal it with a high-quality enamel finish for an flawless, showroom-quality result.
Shower Base Refinishing Bow
People frequently select shower trays for their cost-effectiveness and practicality, providing a practical choice for bathroom design.
However, over time, constant exposure to water and soap can degrade them, causing them to appear aged and hard to clean.
This is where the expertise of Bath Fixer Bow comes into play, helping you avoid unnecessary spending of buying an entirely new shower tray.
The trusted experts at Bow specialize in reliable and efficient service, guaranteeing that your shower surface look as good as new.
From minor scratches to deep chips and stubborn stains, we have the skills and tools to restore your shower trays flawlessly, giving your shower a smooth, refreshed appearance.
What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.
FREE Quote
Request Form
Acrylic Tub Repair in Bow
Our team at Bath Fixer Kingston-upon-Thames specialize in acrylic bath repair, restoring acrylic shower trays, ceramic sink repair, high-quality enamel restoration, and fixing wear and tear on hard surfaces.
Acrylic bathtubs have a softer surface and may incur damage from impact from loose tiles. It’s not uncommon for a shower screen to slip and leave a deep mark. The rim of the bathtub can be split if heavy items are placed on it or it is put under pressure when adjusting surrounding tiles. Many times, an acrylic bath sustains damage before installation.
Whatever the situation is, chances are we can fix it.
Give us a ring, or submit a service request, or send us pictures via WhatsApp or SMS, and we’ll let you know the best solution.
Step-by-Step Process for Professional Bath Refinishing
Upon arrival, we shield the floor, toilet, sink, heaters, and major fixtures.
We thoroughly clean the bath using specialized cleaning agents and remove any rotten silicone around the bath.
We repair any damage, including chips in the bath, scratches, limescale, and faded, thin enamel layers. For major wear and damage on the tub’s bottom, we reinforce and fix it completely.
We mask off the wall tiles, adjacent surfaces, bathroom fixtures, bath drain, and spillover outlet using protective masking tape to avoid any coating residue.
Our team applies a special cleaning solvent to eliminate any grease, accumulated grime, unwanted residues.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Then we spray on the additional adhesion layer for maximum surface adhesion.Where others may stop at one bonding layer, our process includes a double-bonding system, ensuring that the new enamel coating firmly adheres for long-lasting results.
We use an infrared low-bake system to cure the new enamel and remove the masking.
Next, our experts do any detailed finishing touches, buffing, refining, and perfecting the surface to make sure it’s perfect.
Finally, we apply a fresh silicone seal so your bath is fully usable.
Hundreds of satisfied clients in Kingston-upon-Thames rave about our expert bath repair and bath resurfacing
services.
Good communication:
Clear communication and punctual service.
Alex made sure I understood the process before starting.
He protected all surfaces before starting and worked meticulously.
He made sure the area was clean before leaving, and we’re delighted with the results—our bath looks amazing!
- David E, Kingston-upon-Thames
Very Professional
Ilia delivered excellent results — was prompt, professional, and left everything spotless.
Wouldn’t hesitate to recommend Bath Fixer and Ilia
—Sarah W., Kingston-upon-Thames, Bow
Timely and Transparent
Excellent experience.
Phoned on Monday & Ilia arrived on Wednesday at the appointed time to repair 2 holes in acrylic bath.
Everything was handled professionally and smoothly.
You can’t even tell there was damage—the colour match is perfect!
No hesitation in recommending Bath Fixer and their brilliant service.
— Trent D. – Kingston-upon-Thames
High-Quality uPVC Door Repairs
The team at Bath Fixer Bow, we understand the importance of keeping up the aesthetic and strength of your uPVC doors.
Our comprehensive repair process involves seamless tone and finish correction, making the restoration undetectable with the rest of the surface.
We remove debris and smooth out the flaws, ensuring a smooth, even finish.
Handling both light blemishes and major breaks, our professional skills ensures a money-saving, green, and efficient repair option to buying a brand-new uPVC door.
What Customers Ask Most About Our Services
Reglazing usually save you close to 60% on the cost of replacing your enamel bath.
You may choose to switch your classic enamel tub for a budget-friendly plastic tub, but you’ll trade off an extremely sought-after item for a less valuable and less desirable bath.
Absolutely. Our high-quality formula is engineered for use on baths, sinks, sink pedestals, and even ceramic surfaces.
Although, we do recommend that the toilet is upgraded, as a result of the regular scrubbing and chemical exposure. Frequent scrubbing and disinfectants could reduce the lifespan of the finish.
You can resurface your entire suite in any finish you desire.
Our experience is mostly with unsuccessful DIY repair attempts – which might make us slightly biased – as we are aware of the quality contrast when looking at at-home kits and our high-quality refinishing.
While some common bathroom issues are OK to DIY, including simple drain cleaning, most are best left to professionals.
With our trained eye, we to know whether a bigger problem may be hiding in plain sight.
When a cast iron or pressed steel bath is made, it is protected by an ultra-strong and wear-resistant layer of enamel.
This hard-glazed enamel surface is applied through high-temperature fusion under very high temperatures and sets into a smooth, tough surface to result in a sleek, polished look.
Of course! We automatically fix any surface flaws as part of the bath refinishing procedure, but if you have small chips or damage on an otherwise undamaged enamel, we can still help.
We get many calls from people who have had loose tiles fall, heavy drain stoppers, or loose objects into the bath and damaged the enamel.
If this is the case, then don’t worry, we can make it look like new again!
Enquire about Availability and Get a Quote
Speak to The Bath Fixer team now for a no-obligation quote and to secure your service date.
