Bath Repair & Bath Resurfacing Chertsey-Meads, Richmond-upon-Thames

Need Bath Repair & Bath Resurfacing Service in Chertsey-Meads, Richmond-upon-Thames?

Call us
01342 349937
Quote Request Form

Affordable Bath Damage Restoration Chertsey-Meads

From tiny chips to a completely damaged bath, the professionals at Bath Fixer Chertsey-Meads provide a full surface restoration for baths, showers, and sinks and bring back the original beauty of old, cracked, or chipped surfaces offering a cost-effective alternative to replacements and removals.

Bathroom fixtures like basins, bathtubs, and shower trays can get chipped or cracked because of heavy objects falling. These impacts may lead to cracks or chips, however, replacing your entire fixture isn’t necessary.

Call us
01342 349937
How it works
Bath Restoration Credentials Chertsey-Meads
Goole Reviewath Repair Services in Chertsey-Meads Trustpilot Review- Bath Resurfacing in Chertsey-Meads

Expert Basin Repairs in Richmond-upon-Thames

We have years of experience in hard surface repairs and specialize in:

  • Shower Trays Repair
  • Laminate Flooring Repair
  • Cabinet Repair
  • Laminate & Veneer Repair
  • uPVC Cills Repair

What Sets Bath Fixer Apart?

Bath Fixer technicians are trained to deliver high-quality specialized refinishing work covering internal and external doors, floors, kitchen and bathroom countertops, baths, shower bases, tiles, window sills and frames, wood and composite furniture, and a wide range of other surfaces in the Richmond-upon-Thames region.

Bath Resurfacing Richmond-upon-Thames

  • Traditional enamel bathtubs gradually turn rough and difficult to clean over time.

    When this happens, it’s time for the professionals at Bath Fixer Chertsey-Meads to apply our professional reglazing service.

    Acrylic baths after years of wear start to discolour, thus making your bathroom look tired.

    Whether you need a full reglazing of your enamel tub or a full resurfacing for an acrylic fixture, the resurfacing experts at Bath Fixer Chertsey-Meads, your like-new bath surface will continue looking flawless for a long time.
  • The Bath Fixer Chertsey-Meads team can bring back the aesthetics of your bathtub for much less than replacement with our exclusive tub reglazing and repair.

    Resurfacing is a perfect solution for various bath materials, whether it's lightweight acrylic baths and enamel-finished tubs to classic cast iron tubs and reinforced fiberglass baths.

    The technique we use is suitable for any bath type, ensuring we can refinish and fix across different bath styles.

    From acrylic bath repairs to cast iron bath resurfacing, the final result will have your aged tub looking pristine and modern.

    Bath Fixer Chertsey-Meads’s restoration services have allowed property owners cut costs by over 60% by avoiding a full bathtub installation.

    Through reglazing, all marks and imperfections are removed, and apply a new surface coating for an ultra-smooth surface.

Professional Shower Tray Reglazing Chertsey-Meads

People frequently select shower trays for their cost-effectiveness and convenience, providing a practical feature for bathroom layouts.

However, over time, daily use can cause visible damage, causing them to appear aged and hard to clean.

This is where the expertise of Bath Fixer Chertsey-Meads comes into play, saving you from the cost and inconvenience of replacing your shower trays.

Our experienced specialists in Chertsey-Meads is dedicated to providing high-quality and dependable repairs, restoring your shower trays return to pristine condition.

Be it cracks, fading, or surface damage, our specialists use professional-grade materials to repair and resurface any imperfections, ensuring a polished, like-new finish.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

FREE Quote Request Form

Acrylic Tub Repair in Chertsey-Meads

Bath Fixer Richmond-upon-Thames specialize in fixing damaged acrylic baths, restoring acrylic shower trays, ceramic basin restoration, durable bath refinishing, and damage repair for solid surfaces.

Acrylic tubs are relatively delicate and can be affected from accidents during bathroom renovations. Occasionally a shower door to fall and dig into the surface. The rim of the bathtub can break if undue force is exerted or is impacted when removing the panel. Frequently, an acrylic bath sustains damage before installation.

Regardless of the issue, our experts can likely restore it.

Reach out to us, or fill in an enquiry form, or send us pictures via WhatsApp or SMS, and we can advise.

How We Carry Out Bath Resurfacing and Re-Enamelling

Upon arrival, we lay protective sheets on the ground surface, commode, washbasin, heaters, and major fixtures.

We meticulously scrub the bath with specific cleaners and eliminate old, degraded sealant.

Our experts fix all types of damage, including small fractures and surface chips, abrasions, calcium buildup, and faded, thin enamel layers. If there are holes or damage at the bottom of the bath, we reinforce and fix it completely.

We cover the tiles, walls, bathroom fixtures, waste, and spillover outlet with masking to keep them clean and untouched.

We utilize a special cleaning solvent to dissolve and lift oil residues, dirt, impurities and stains.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Following that, we coat the surface with the second bonding agent with a hot air gun.In contrast to many resurfacing services, we reinforce the bond with a second primer, ensuring that the new enamel coating firmly adheres for long-lasting results.

We employ an infrared low-bake system to harden and set the fresh enamel coating and take off the protective coverings.

We then carry out precision finishing, buffing, refining, and perfecting the surface to ensure a like-new appearance.

Finally, we apply a new bead of sealant so the surface is watertight and secure.

Granite Worktop Chip Repair Chertsey-Meads, Richmond-upon-Thames

Stone work surfaces may sustain chips on their edges, since this is where they are weakest.

The material is not supported on the open edge, and a dropped pan or utensil could result in a noticeable chip.

  • Stubborn Stains on Worktops While these surfaces are built to last, some substances and spills have the potential to leave stubborn discoloration on these surfaces.
  • Chips, Scratches, and Dents Minor surface abrasions, heavy impacts, or everyday activities can result in light surface marks or shallow marks on the worktop.
  • Material Breakage Perimeter sections, if subjected to hard knocks, can chip, affecting its flawless appearance.

Don’t Wait, Repair Your Worktop Now! — Get in Touch!

Contact the Richmond-upon-Thames specialists for high-quality service at great prices and professional guidance.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Richmond-upon-Thames rave about our expert bath repair and bath resurfacing services.

Good communication:

Clear communication and punctual service. He provided a thorough explanation and got to work right away. He carefully masked all surrounding areas and put in a lot of effort. He made sure the area was clean before leaving, and we’re delighted with the results—our bath looks amazing! - David E, Richmond-upon-Thames

Very Professional

Ilia delivered excellent results — was prompt, professional, and left everything spotless. Highly recommend Ilia and Bath Fixer —Sarah W., from Chertsey-Meads in Richmond-upon-Thames

Timely and Transparent

Outstanding service. Scheduled on Monday, and Ilia showed up on time Wednesday to restore my damaged acrylic bath. The process was seamless, with friendly and efficient service. You can’t even tell there was damage—the colour match is perfect! Absolutely would recommend Bath Fixer and Ilia to anyone. — Trent D. from Richmond-upon-Thames

Professional uPVC Door Restoration
Here at Bath Fixer Chertsey-Meads, we recognize the value of preserving the look and durability of your uPVC doors.

Our expert repair techniques includes precise color blending and surface replication, so the door retains its original appearance with the rest of the surface.

We remove debris and smooth out the flaws, ensuring a smooth, even finish.

Handling both light blemishes and major breaks, our high-level craftsmanship ensures a money-saving, green, and efficient repair option to installing a new door.

What Customers Ask Most About Our Services

Bath resurfacing can frequently save you up to 60% on the cost of installing a new bathtub.

It’s possible to exchange your classic enamel tub for a mass-produced acrylic bath, but you will be losing an premium-quality item for a much lower-quality and less desirable bath.

Of course. Our material is engineered for use on tubs, sinks, pedestals, and even ceramic surfaces.

Although, we do recommend that the lavatory is changed, as a result of the harsh cleaning process. Toilet brushes and harsh cleaners could reduce the lifespan of the finish.

You have the option to refinish your entire bathroom setup to match your preferred shade.

We only see cases where repair kits didn’t work well – so our viewpoint is shaped by these cases – also, we know the difference in quality when comparing a DIY repair kit and what we can achieve.

While some common bathroom issues are OK to DIY, for example, removing a drain clog, most are best left to professionals.

This is due to our expertise to know whether a bigger problem may be hiding in plain sight.

In the production process of cast iron and steel baths, it is covered in an highly resilient and long-lasting layer of enamel.

This specialized enamel finish is fused onto the bath’s surface at extreme heat levels and sets into a smooth, tough surface to leave a smooth glossy surface.

Absolutely! We take care of any damage as part of the bath refinishing procedure, yet, if your bath has tiny blemishes on an otherwise intact bathtub, we offer a targeted fix.

We frequently hear from customers who have dropped tiles, heavy drain stoppers, or various tools into the bath and left noticeable marks.

No worries if you’ve experienced this, we can make it look like new again!

Get a Free Quote and Check Our Availability

Contact The Bath Fixer today for your free estimate and to confirm scheduling options.

Get a Quote
CallCall Now QuoteFREE Quote