Bath Fixer Hertfordshire specialists are experts in bath repair for acrylic surfaces, shower tray refinishing, seamless sink refinishing, professional bath resurfacing, and long-lasting surface restoration.
Acrylic baths are prone to surface damage and are vulnerable to harm from tiling mishaps. At times a glass partition to shift and dig into the surface. The perimeter of the tub can break if it bears too much weight or experiences force when accessing the plumbing. Many times, an acrylic tub gets harmed during transportation.
Whatever the situation is, we have the skills to repair it.
Get in touch by phone, or send us a quick message, or share images through text or WhatsApp, and we’ll let you know the best solution.
Upon arrival, we lay protective sheets on the bathroom floor, WC, basin, heaters, and major fixtures.
We professionally clean the surface using industry-approved solutions and get rid of deteriorated caulking around the tub.
We repair any damage, covering bathtub chips, abrasions, mineral deposits, and faded, thin enamel layers. If there are holes or damage at the bottom of the bath, we restore it professionally.
We mask off the surrounding tiles, adjacent surfaces, faucets, bath drain, and overflow drain with specialized covering materials to prevent spray getting on these.
We use a high-strength degreasing solution to eliminate any grease, dirt, any remaining debris.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
We proceed by spraying the reinforcing primer with a hot air gun.Unlike other bath re-enamelling companies, we use two bonding agents, so the refinished surface has a very strong hold to the original surface.
We apply an infrared low-bake system to harden and set the fresh enamel coating and remove the masking.
After that, we perfect the final details, bringing out a smooth, high-gloss effect to achieve an impeccable result.
As a finishing step, we seal with a new bead of sealant so the surface is watertight and secure.
Stone work surfaces can suffer minor damage at the corners, as this is the most vulnerable point.
The material is not supported on the open edge, and a dropped pan or utensil can clip it and knock a bit off.
- Persistent Marks and Discoloration Even though they are highly durable, various harsh products have the potential to leave stubborn discoloration on these surfaces.
- Scratches and Dents Unintentional knife marks, heavy impacts, or everyday activities may cause faint abrasions or dents on the worktop.
- Edge Damage Perimeter sections, if hit with force, could break off slightly, compromising the worktop’s seamless look.
