Bath Fixer Lewes provide specialist bath repair, resurfacing, and enamel restoration services throughout Lewes and the wider East Sussex area. Our trained technicians handle everything from isolated chips on modern acrylic baths to full enamel restoration on period cast iron tubs — offering a practical, cost-effective alternative to ripping out and replacing your existing bath.
Each repair starts with a detailed assessment of the damage and the bath material. A hairline crack on a fibreglass shower tray requires a fundamentally different technique to rust corrosion on a Victorian cast iron roll-top. Acrylic, pressed steel, stone resin, cast iron, and fibreglass — Bath Fixer Lewes have the knowledge and materials to work on all of them, matching the repair approach to the specific surface and condition every time.
The defining feature of Bath Fixer's service is our two-stage bonding system. Most bathroom repair firms apply a single primer coat before the enamel layer. We apply two bonding agents, each cured with a high-temperature gun, to build an exceptionally strong adhesion between the original surface and the new coating. The outcome is a finish that withstands daily use without chipping, peeling, or yellowing for years rather than months.
Beyond baths, we also repair sinks, basins, shower trays, ceramic tiles, uPVC surfaces, granite worktops, and solid surface fixtures. If a hard surface in your Lewes property is damaged, cracked, chipped, or worn — there is every chance Bath Fixer Lewes can restore it without the expense or disruption of a full replacement.
Nearby Areas We Serve: The same types of bathroom repair challenges we address in Lewes are found across the surrounding East Sussex towns. Property owners in Brighton and Seaford encounter comparable issues with ageing enamel, impact damage, and worn bath surfaces. See our area-specific guides for detailed information about your location.
Bath Fixer Lewes use a proprietary two-stage bonding system that delivers a stronger, longer-lasting finish than standard single-primer methods.
What Bath Fixer Lewes bring to homeowners, landlords, and property managers across East Sussex
Bath Repairs Completed
Client Satisfaction Rate
Years of Local Experience
Our technicians blend the precise shade of your existing bath surface using professional-grade colour matching. The repaired area merges invisibly with the surrounding finish — even on older period baths where the original white has mellowed or yellowed over many decades of use.
Most chip repairs and minor restorations are finished within a single visit. Full bath resurfacing typically takes four to six hours on site, with the bath ready for use within twenty-four hours. Minimal disruption to your daily routine or tenancy schedule.
Our dual bonding agent system and infrared curing process produce a factory-quality finish that stands up to daily use without chipping, peeling, or staining. Every repair is backed by a written guarantee. The result is a surface that looks and feels new for years to come.
Bath Fixer Lewes technicians are fully trained in specialist refinishing across enamel baths, acrylic tubs, pressed steel, stone resin, shower trays, sinks, worktops, and uPVC surfaces. We carry full public liability insurance for every job we undertake.
Lewes is one of the most historically rich towns in Sussex, and its housing stock reflects centuries of development. The narrow lanes of the town centre are lined with Georgian and medieval townhouses, many Grade II listed, featuring original bathroom fittings that are irreplaceable in character and quality. The Victorian and Edwardian terraces in areas like Wallands, Southover, and the Pells have their own distinct bath types — predominantly cast iron and pressed steel — while the more recent developments along the river corridor and at Southdowns Park feature modern acrylic and composite fixtures.
The cast iron baths found in Lewes's older properties are particularly prone to enamel wear where decades of use and abrasive cleaning products have thinned the surface, exposing bare metal that corrodes when moisture settles. The pressed steel baths common in mid-century homes chip more easily around the tap end and overflow, while acrylic baths in newer builds are vulnerable to impact cracks and stress fractures from concentrated weight along the edges.
Bath Fixer Lewes have developed our approach around these local distinctions. We assess every bath individually — material, age, condition, and damage type — and apply the repair method best suited to that specific surface. That diagnostic precision is the difference between a repair that endures and one that fails within months.
Real examples of restoration work completed by Bath Fixer across the Lewes and East Sussex area
The owner of a Grade II listed Georgian townhouse on Southover High Street had an original cast iron roll-top bath that had served the property for well over a century. Years of limescale accumulation and cleaning with abrasive products had stripped large sections of enamel down to bare metal. Rust blooms had spread across the base and up the sides, and several deep chips around the waste end had exposed raw iron. A bathroom fitter quoted over £3,500 for removal, new tiling, plumbing modifications, and a replacement bath — with the added complication of listed building restrictions on structural changes.
Bath Fixer Lewes treated all corroded areas with a specialist rust converter, then rebuilt the damaged enamel profile using a high-adhesion filler. The full interior surface was keyed, degreased, and prepared for our dual bonding agent process. Two coats of colour-matched enamel were sprayed and cured using our infrared system, followed by a meticulous polish and perimeter reseal.
The bath was restored to a bright, smooth finish with no visible trace of the previous rust or chip damage. The homeowner preserved the character of the original fitting, saved over £3,000 compared to a replacement, and avoided the complications of altering a listed property. The repair was completed in a single visit with a written guarantee.
A landlord managing a two-bedroom flat in the Southdowns Park development contacted Bath Fixer after a departing tenant left a cracked acrylic bath. A heavy object had caused a deep impact fracture near the centre of the bath, with hairline cracks radiating outward from the point of impact. The property was due for re-letting within ten days, and replacing the bath would have required a plumber, tiler, and a minimum five-day turnaround — well beyond the available window.
We stabilised the radiating cracks to prevent further spread, filled the impact fracture with a structural-grade compound, and sanded the repaired area flush with the surrounding surface. The repair was colour-matched to the original white acrylic, blended into the existing finish, and sealed with a protective topcoat cured on site.
The repair was completed in under four hours. The landlord met the re-letting deadline comfortably, the new tenant moved in on schedule, and the bath showed no evidence of the original damage. The total cost was a fraction of the replacement estimate, with a written guarantee covering the work.
Step-by-step breakdown of how Bath Fixer Lewes restore your bath to factory-fresh condition
We dust-sheet the flooring, WC, basin, radiators, and surrounding fixtures. Old sealant is stripped away and the entire work area is thoroughly protected before any repair begins.
Professional cleaning agents remove all soap scum, limescale, and residue. Every imperfection — chips, cracks, abrasions, mineral deposits, and erosion — is repaired and structural issues addressed.
Tiles, walls, taps, drain, and overflow are masked with specialist covering materials. A professional-grade degreaser is applied to eliminate any remaining contaminants from the bath surface.
We apply the first bonding agent, then reinforce with a second primer using high-temperature application. This two-stage process — unique to Bath Fixer — creates an ultra-durable bond with the original surface.
The new enamel surface is professionally sprayed and cured using our infrared low-bake system. This accelerates bonding and produces a smooth, hard-wearing factory-quality finish.
We polish the surface to a pristine finish, remove all masking, and apply a protective waterproof sealant to ensure a watertight, secure result. The bath is inspected before sign-off.
Feedback from homeowners and landlords who have used Bath Fixer in East Sussex
"We had a badly chipped cast iron bath in our Victorian terrace near the High Street. The technician arrived on time, protected everything carefully, and left the bath looking absolutely immaculate. The colour match was spot on and the whole process was explained clearly from start to finish. Extremely impressed with Bath Fixer."
"Ilia repaired a deep scratch and several chips on our acrylic bath in a new-build flat near the Phoenix Industrial Estate. Quick, professional, and the result is flawless. You genuinely cannot see where the damage was. Would not hesitate to recommend Bath Fixer to anyone in Lewes."
"Our letting agent recommended Bath Fixer after the previous tenants left damage to the bath and basin in our rental property in Malling. Alex carried out both repairs in a single visit, the finish is superb, and the turnaround meant we avoided any void period. Outstanding service from start to finish."
Transparent pricing from Bath Fixer Lewes — choose the service level that matches your repair needs
Bath Fixer Lewes offer three tiers of service designed to match different types of damage and budget. Every repair uses the same professional materials and dual bonding system — the distinction lies in the scope of work involved. Whether you need a single chip addressed or an entire bath resurfaced, there is a package tailored to your situation.
From
Individual chip or crack repair on any bath surface
From
Complete bath resurfacing with dual bonding system
From
Complete bathroom refinishing for a full transformation
Common questions answered by Bath Fixer Lewes
Resurfacing your bath typically costs between forty and sixty per cent less than ripping out the existing bath and fitting a new one. In Lewes, where many homes are period properties with original cast iron or pressed steel baths, replacement often involves disturbing period tiling, reconfiguring plumbing, and repairing surrounding surfaces. Resurfacing preserves the quality and character of your original bath while restoring it to a factory-fresh finish in a single day.
Yes. Our professional coating system works on bathtubs, washbasins, sink pedestals, and ceramic tile surfaces. We can refinish your complete bathroom suite and match any colour you choose. The only fixture we advise replacing rather than resurfacing is the toilet, as the abrasive cleaning chemicals and brushes used in regular toilet maintenance will gradually wear through a refinished coating over time.
Absolutely. We carry out individual chip, scratch, and crack repairs on otherwise sound bath surfaces every week. Dropped bottles, showerheads, and heavy fittings are the most frequent causes of impact damage across Lewes and East Sussex. Our colour-matching process ensures the repaired area blends invisibly with the existing finish, regardless of the age or shade of the original surface.
A standard full bath resurfacing takes between four and six hours on site. That covers surface preparation, chip and crack repair, dual bonding agent application, enamel spray coating, infrared curing, and final polishing. The bath is ready for light use within twenty-four hours and fully cured within forty-eight hours of completion.
A significant proportion of our work involves correcting failed DIY repairs. The kits sold in hardware stores use consumer-grade materials that lack the adhesion and durability of professional coatings. They frequently produce a visible patch, an uneven texture, or a finish that yellows and lifts within weeks. A professional repair by Bath Fixer Lewes costs more than a kit but delivers a result that lasts years rather than days.
Bath Fixer covers the whole of Lewes and the wider East Sussex area. Our regular service areas include Lewes town centre, Southover, Wallands, Cliffe, Malling, Ringmer, Ditchling, Seaford, Newhaven, and Uckfield. We also attend properties in neighbouring areas including Brighton, Haywards Heath, and Burgess Hill.
Have another question? Contact Bath Fixer Lewes directly.
Bath Fixer provide professional bath repair and resurfacing across Lewes and the wider East Sussex area
The historic core of Lewes features Georgian and medieval townhouses, many Grade II listed, alongside Victorian terraces and converted period properties. Original cast iron baths and period enamel fixtures are common, often requiring expert enamel restoration and careful colour matching to preserve the character of these distinctive homes.
Book in LewesThe coastal town of Seaford has a blend of Edwardian villas, 1930s semi-detached homes, and post-war bungalows. Pressed steel baths with worn enamel and ageing acrylic panels are the most frequent repair requests from homeowners across the town.
Bath Repair SeafordNewhaven's housing stock ranges from Victorian terraces close to the river to 1960s council-built estates and newer developments near the harbour. Rental turnover generates steady demand for between-tenancy bath repairs and resurfacing across the town.
Bath Repair NewhavenThe villages surrounding Lewes feature period cottages, farmhouses, and detached family homes spanning several centuries. Many retain original cast iron and pressed steel baths that benefit from professional resurfacing rather than costly replacement in sensitive rural settings.
Book in RingmerBrighton's dense mix of Regency terraces, Victorian townhouses, and modern flats creates a wide variety of bath repair needs. From heritage roll-top restorations to acrylic crack repairs in student lets, Bath Fixer attend properties across the city on a regular basis.
Bath Repair BrightonBath Fixer operate across the wider East Sussex region and into neighbouring areas. We regularly attend properties in the surrounding towns that share similar housing stock and repair needs.
Bath Fixer Lewes provide the professional bath repair and resurfacing service that East Sussex property owners can depend on. Whether you need a single chip repaired, a full bath resurfaced, or a complete bathroom suite refinished, our trained specialists deliver a factory-quality finish backed by a written guarantee.
Every repair uses our proprietary dual bonding system and infrared curing process — the same professional methodology whether the job is a minor touch-up or a full restoration. We do not compromise on materials, we do not take shortcuts, and we do not leave until the job meets our exacting standards.
Call us today or complete the form below to arrange your free quote.
For urgent bath repair needs in Lewes, call Bath Fixer directly.
Call Now