The experts at Bath Fixer London specialize in seamless acrylic bath repairs, acrylic shower tray repair, ceramic basin restoration, professional bath resurfacing, and fixing wear and tear on hard surfaces.
Acrylic baths are prone to surface damage and may incur damage from tiling mishaps. It’s not uncommon for a shower guard to dislodge and leave a deep mark. The perimeter of the tub can be split if undue force is exerted or it is put under pressure when accessing the plumbing. Frequently, an acrylic bath can be damaged in storage or transit.
Regardless of the issue, we have the skills to repair it.
Reach out to us, or complete our online contact form, or message us with a few photos, and we’ll offer professional recommendations.
Upon arrival, we cover the ground surface, commode, washbasin, warming appliances, and major fixtures.
We professionally clean the surface using industry-approved solutions and get rid of deteriorated caulking around the tub.
We repair any damage, including chips in the bath, surface marks, calcium buildup, and worn away enamel from hard water. Should your bathtub have structural issues, we reinforce and fix it completely.
Our team carefully protects the surrounding tiles, bathroom walls, faucets, drain area, and overflow drain using protective masking tape to ensure no overspray affects them.
We use a special cleaning solvent to remove grimy deposits, dirt, unwanted residues.
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
We proceed by spraying the additional adhesion layer through heat-assisted bonding.In contrast to many resurfacing services, we reinforce the bond with a second primer, allowing the reglazed bath forms an ultra-durable bond.
We use an advanced infrared curing method to ensure a durable, long-lasting finish and take off the protective coverings.
Following this, we do any detailed finishing touches, ensuring a flawless, mirror-like finish to make sure it’s perfect.
Finally, we apply a new bead of sealant so it is ready for use.
Stone work surfaces may sustain chips on their edges, because this area lacks structural support.
The material is not supported on the open edge, and a forceful hit from cookware can clip it and knock a bit off.
- Surface Staining and Fading While these surfaces are built to last, certain chemicals or foods may occasionally cause lasting marks on these surfaces.
- Scuffs and Impact Damage Minor surface abrasions, heavy impacts, or daily use may cause light surface marks or small depressions on the worktop.
- Material Breakage The most exposed areas, if subjected to hard knocks, could break off slightly, disrupting the smooth finish.
