Bath Repair Shepherds-Bush, Hammersmith-and-Fulham

Need Hard Surface Repair Service in Shepherds-Bush, Hammersmith-and-Fulham?

Call us
01342 349937
Quote Request Form

Cost Effective Sink Chip Repair Shepherds-Bush

From tiny chips to a heavily scratched or cracked bath, the professionals at Bath Fixer Shepherds-Bush are equipped to perform a seamless repair for damaged sinks, showers, and tubs and renew old, cracked, or chipped surfaces through a money-saving solution instead of costly replacements.

Basin, bath, or shower tray surfaces frequently suffer wear and tear due to dropping items on the surface. Such incidents can leave noticeable damage, but that doesn’t mean you need a full replacement.

Call us
01342 349937
How it works
Bath Restoration Credentials Shepherds-Bush
Goole Reviewath Repair Services in Shepherds-Bush Trustpilot Review- Bath Resurfacing in Shepherds-Bush

Expert Shower Trays Repair in Hammersmith-and-Fulham

We have years of experience in hard surface repairs and specialize in:

  • Shower Trays Repair
  • Floor Tile Repair
  • Worktops Repair
  • Wooden Worktops Repair
  • Glass Repair Repair

What Sets Bath Fixer Apart?

Our skilled Bath Fixer technicians specialize in expert surface restoration services on doors, various flooring surfaces, kitchen and bathroom countertops, bathtubs, shower trays, ceramic and porcelain tiles, window sills and frames, furniture, and a wide range of other surfaces throughout Hammersmith-and-Fulham.

Bath Resurfacing Hammersmith-and-Fulham

  • Traditional enamel bathtubs tend to become rough and difficult to clean with regular use.

    At this point, it’s time for our expert team at Bath Fixer Shepherds-Bush to perform our enamel restoration treatment.

    Fiberglass or acrylic baths after years of wear develop yellowing and staining, reducing the aesthetic appeal of your bath.

    No matter if you require a professional restoration for an enamel bath or an acrylic bath repair, trust Bath Fixer Shepherds-Bush to deliver, your refreshed and revitalized bath will maintain its quality good as ever for many more years.
  • The Bath Fixer Shepherds-Bush team can rejuvenate the look of your bathtub without breaking the bank with our high-quality bathtub refinishing and restoration.

    Our restoration process is the best choice for various bath materials, ranging from acrylic and enamel to cast iron and fibreglass.

    Our specialist process is designed for various bath surfaces, enabling us to repair and restore for any bathtub design.

    From acrylic bath repairs to refinishing cast iron bathtubs, the final result will have your old bath looking pristine and modern.

    Bath Fixer Shepherds-Bush’s restoration services have allowed property owners cut costs by over 60% versus completely replacing the tub.

    Through reglazing, we get rid of all the stains and scratches, and apply a new surface coating for an immaculate finish.

Shower Tray Repair and Resurfacing Shepherds-Bush

People frequently select shower trays for their budget-friendly nature and ease of installation, delivering a modern feature for bathroom layouts.

But as the years go by, wear and tear can take its toll, causing them to appear aged and challenging to keep in good condition.

Here’s where our specialists at Bath Fixer Shepherds-Bush can help, eliminating the need for a pricey replacement of replacing your shower trays.

The trusted experts at Shepherds-Bush are committed to delivering high-quality and dependable repairs, guaranteeing that your shower surface are restored to their former glory.

From minor scratches to deep chips and stubborn stains, we have the skills and tools to restore your shower trays flawlessly, transforming your shower base to a factory-fresh look.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

FREE Quote Request Form

Shepherds-Bush Acrylic Bathtub Restoration

The experts at Bath Fixer Hammersmith-and-Fulham are specialists in seamless acrylic bath repairs, acrylic shower tray repair, ceramic basin restoration, bathtub reglazing, and hard surface repairs.

Acrylic baths are prone to surface damage and are susceptible to damage from dropped tiles while tiling. It’s not uncommon for a loose shower screen to move and dig into the surface. The acrylic border can crack if undue force is exerted or is leveraged when accessing the plumbing. Frequently, an acrylic tub gets harmed during transportation.

Regardless of the issue, we have the skills to repair it.

Get in touch by phone, or submit a service request, or message us with a few photos, and we’ll assess the damage.

Step-by-Step Process for Professional Bath Refinishing

Arrive and protect the bathroom floor, toilet, basin, heating units, and any exposed surfaces.

We professionally clean the surface using specialized cleaning agents and get rid of deteriorated caulking around the tub.

We restore and fix imperfections, such as minor cracks and chipped enamel, surface marks, hard water stains, and worn away enamel from hard water. If the base of your bath has cracks or holes, we restore it professionally.

Our team carefully protects the tiles, adjacent surfaces, bathroom fixtures, waste, and overflow drain with specialized covering materials to prevent spray getting on these.

Our team applies a high-strength degreasing solution to dissolve and lift stubborn grease buildup, dirt, etc..

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Following that, we coat the surface with the additional adhesion layer with a hot air gun.In contrast to many resurfacing services, we reinforce the bond with a second primer, so the refinished surface forms an ultra-durable bond.

We apply an advanced infrared curing method to cure the new enamel and unveil the fully restored bath.

After that, we perfect the final details, buffing, refining, and perfecting the surface to deliver a pristine, professional-grade outcome.

To complete the process, we add a new bead of sealant so your bath is fully usable.

Expert Granite Surface Repair Shepherds-Bush, Hammersmith-and-Fulham

Granite kitchen tops are prone to chipping on their edges, due to their exposed design.

The material is not supported on the open edge, and a hard object like a pot may cause a small section to break away.

  • Stains and Discolouration While these surfaces are built to last, various harsh products can sometimes leave persistent stains on these surfaces.
  • Surface Marks and Indentations Unintentional knife marks, strong collisions, or constant usage might lead to light surface marks or small depressions on the worktop.
  • Material Breakage The edges or corners, under sudden pressure, can chip, compromising the worktop’s seamless look.

Don’t Wait, Repair Your Worktop Now! — Get in Touch!

Get in touch with the experts at Hammersmith-and-Fulham for cost-effective solutions and professional guidance.

Call us today for a free quote

Happy Customers Speak Out:

Hundreds of satisfied clients in Hammersmith-and-Fulham rave about our expert bath repair and bath resurfacing services.

Good communication:

Great communication with a timely arrival. Alex explained everything and then got straight to it. He was meticulous in masking up and put in a lot of effort. He left no mess behind, and we’re very pleased with the final result—the bath looks brand new. - David E, Hammersmith-and-Fulham

Very Professional

Ilia did a fantastic job — handled everything with care, professionalism, and delivered stunning results. Absolutely recommend Ilia for any bath repair —Sarah W., Hammersmith-and-Fulham, Shepherds-Bush

Timely and Transparent

Brilliant service. Contacted them on Monday, and by Wednesday, Ilia was right on time to handle the acrylic bath repair. Everything was handled professionally and smoothly. You can’t even tell there was damage—the colour match is perfect! No hesitation in recommending Bath Fixer and their brilliant service. — Trent D., Hammersmith-and-Fulham

Reliable uPVC Door Resurfacing
Here at Bath Fixer Shepherds-Bush, we understand the importance of keeping up the aesthetic and strength of your uPVC doors.

Our comprehensive repair process involves seamless tone and finish correction, making the restoration undetectable with the rest of the panel.

We carefully ready the surface for repairs, meticulously filling and smoothing imperfections.

Whether dealing with small marks or significant damage, our high-level craftsmanship offers an affordable, eco-friendly, and hassle-free solution to buying a brand-new uPVC door.

Top FAQs About What We Offer

Resurfacing will very often save you close to 60% on the cost of replacing your enamel bath.

It’s possible to exchange your classic enamel tub for a budget-friendly plastic tub, but you’ll trade off an premium-quality item for a less durable and less desirable bath.

Absolutely. Our material is formulated to adhere to tubs, basins, sink pedestals, and even tiles.

That being said, we suggest that the WC is swapped out, owing to the harsh cleaning process. Frequent scrubbing and disinfectants may cause premature deterioration.

You have the option to refinish your complete set of fixtures in any finish you desire.

We often come across cases where repair kits didn’t work well – which may give us a certain perspective – also, we know the difference in quality when looking at at-home kits and our high-quality refinishing.

Some bathroom fixes, like unclogging a drain, can be DIY-friendly, like clearing a blocked drain, it’s usually safer to rely on professionals.

With our trained eye, we to spot deeper concerns that could go unnoticed.

During the manufacturing of a cast iron or pressed steel bathtub, it is protected by an ultra-strong and wear-resistant layer of enamel.

This hard-glazed enamel surface is applied through high-temperature fusion under very high temperatures and hardens during cooling to leave a smooth glossy surface.

Absolutely! We handle any damage as part of the bath refinishing procedure, yet, if your bath has small chips or damage on an otherwise well-maintained bath, we have a solution.

Many of our clients reach out to us who have had loose tiles fall, chrome plugs, or various tools into the bath and caused small dents.

If this is the case, then don’t worry, our team can restore it seamlessly!

Check Availability and Request a Quote

Speak to The Bath Fixer team now for a cost-free quote and to check availability.

Get a Quote
CallCall Now QuoteFREE Quote