Bath Resurfacing St-Pauls, Lewisham

Need Bath Repair Service in St-Pauls, Lewisham?

Affordable Bath Damage Restoration St-Pauls

From minor imperfections to a badly deteriorated tub, our experts at Bath Fixer St-Pauls provide a full surface restoration for baths, showers, and sinks and renew old, cracked, or chipped surfaces using a money-saving alternative to replacements and removals.

Bathroom fixtures like basins, bathtubs, and shower trays are often damaged from accidental impacts. This can cause the surface to crack or chip, however, replacing your entire fixture isn’t necessary.

Bath Restoration Credentials St-Pauls
Goole Reviewath Repair Services in St-Pauls Trustpilot Review- Bath Resurfacing in St-Pauls

Expert Shower Trays Repair in Lewisham

Backed by years of experience, we excel in hard surface restoration, including:

  • Shower Trays Repair
  • Laminate Flooring Repair
  • Kitchen Sinks Repair
  • Laminate & Veneer Repair
  • Door Repair

What Sets Bath Fixer Apart?

Bath Fixer professionals are qualified to carry out expert damage repair solutions covering all types of doors, floors, solid and laminate worktops, baths, fiberglass and acrylic shower trays, tiles, UPVC and wooden window frames, wood and composite furniture, and a wide range of other surfaces throughout Lewisham.

Bath Resurfacing Lewisham

  • Old enamel baths often get gritty and challenging to keep spotless with regular use.

    If your bath reaches this stage, it’s time for Bath Fixer St-Pauls to conduct our bath resurfacing service.

    Fiberglass or acrylic baths with frequent use lose their original shine, giving your space a dull, worn-out look.

    Whether you need an enamel bath resurface or a full resurfacing for an acrylic fixture, trust Bath Fixer St-Pauls to deliver, your beautifully restored bathtub will continue looking pristine for years to come.
  • Bath Fixer St-Pauls experts are able to revive the appearance of your bath at a fraction of the cost with our exclusive bath resurfacing and repair service.

    Resurfacing is a perfect solution for all kinds of baths, be it lightweight acrylic baths and enamel to cast iron and fibreglass.

    Our specialist process is suitable for any bath type, enabling us to repair and restore across different bath styles.

    Whether fixing acrylic tubs to restoring old cast iron baths, the final result will have your worn-out bathtub looking spotless and refreshed.

    The Lewisham-wide bathtub refinishing service we offer have enabled homeowners cut costs by over 60% instead of purchasing a brand-new bath.

    With resurfacing, scratches, stains, and dull areas are erased, and add a durable refinishing layer for an flawless, showroom-quality result.

Shower Base Refinishing St-Pauls

Shower trays are often chosen for their affordability and space-saving design, serving as a modern feature for space-conscious bathrooms.

Yet with frequent use, daily use can cause visible damage, making them look outdated and hard to clean.

That’s when Bath Fixer St-Pauls steps in, sparing you the hassle and expense of replacing your shower trays.

Our team of experts in St-Pauls focus on offering top-tier and hassle-free restorations, restoring your shower trays regain their original shine.

No matter the level of wear and tear, our specialists use professional-grade materials to tackle any issue, leaving your shower trays looking shiny and brand new.

What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.

FREE Quote Request Form

Acrylic Bath Repair St-Pauls

Bath Fixer Lewisham provide industry-leading solutions for bath repair for acrylic surfaces, fixing cracks and damage in shower trays, ceramic sink repair, bathtub reglazing, and hard surface repairs.

Acrylic tubs are relatively delicate and may incur damage from falling tiles during tiling. At times a glass partition to shift and cause a visible indentation. The lip on the edge of the bath can snap if it bears too much weight or is stressed when removing the panel. Frequently, an acrylic bath sustains damage before installation.

Whatever the problem may be, our experts can likely restore it.

Get in touch by phone, or submit a service request, or share images through text or WhatsApp, and we can advise.

Complete Guide to Bath Re-Enamelling and Resurfacing

Upon arrival, we protect the bathroom floor, lavatory, sink, heaters, and major fixtures.

We professionally clean the surface using industry-approved solutions and remove any rotten silicone around the bath.

We repair any damage, including minor cracks and chipped enamel, abrasions, hard water stains, and worn away enamel from hard water. If the base of your bath has cracks or holes, we repair that also.

Our team carefully protects the tiles, walls, bathroom fixtures, drain opening, and spillover outlet using protective masking tape to ensure no overspray affects them.

Our team applies a special cleaning solvent to get rid of oil residues, dust and particles, impurities and stains.

Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.

Following that, we coat the surface with the second bonding agent for maximum surface adhesion.Where others may stop at one bonding layer, we reinforce the bond with a second primer, so the enamel surface we spray on remains securely attached for years to come.

Our team utilizes an professional-grade heat-curing process to ensure a durable, long-lasting finish and unveil the fully restored bath.

Following this, we apply expert refinements, polishing, etc. to make sure it’s perfect.

Finally, we apply a high-quality sealing layer so your newly resurfaced bath is protected.

Granite Worktop Chip Repair St-Pauls, Lewisham

Granite kitchen tops can suffer minor damage on their edges, due to their exposed design.

The overhanging edges are particularly susceptible, and a forceful hit from cookware could result in a noticeable chip.

  • Stubborn Stains on Worktops Despite their resistance, various harsh products have the potential to leave stubborn discoloration on these surfaces.
  • Surface Marks and Indentations Unexpected nicks, forceful blows, or constant usage may cause light surface marks or shallow marks on the worktop.
  • Chipping The edges or corners, under sudden pressure, may sustain chips, diminishing its aesthetic appeal.

Don’t Wait, Repair Your Worktop Now! — Get in Touch!

Reach out to the experts at Lewisham for budget-friendly repairs and expert advice.

Happy Customers Speak Out:

Hundreds of satisfied clients in Lewisham rave about our expert bath repair and bath resurfacing services.

Reliable uPVC Door Resurfacing
Here at Bath Fixer St-Pauls, we recognize the value of maintaining the appearance and functionality of your vinyl-coated doors.

Our specialized fixing approach features seamless tone and finish correction, so the door retains its original appearance with the rest of the panel.

We carefully ready the surface for repairs, flawlessly restoring damaged spots.

Whether dealing with small marks or significant damage, our professional skills delivers a budget-friendly, long-lasting, and practical fix to buying a brand-new uPVC door.

Frequently Asked Questions About Our Services

Bath resurfacing can frequently save you close to 60% on the cost of installing a new bathtub.

It’s possible to exchange your enamel bath for a mass-produced acrylic bath, but you will be losing an valuable and timeless item for a much lower-quality and more fragile bath.

Definitely. Our resurfacing solution is engineered for use on bathtubs, basins, pedestals, and even tiles.

We would however recommend that the lavatory is replaced, this is due to the way toilets are cleaned. Toilet brushes and harsh cleaners will damage the coating material over time.

You can resurface your full bathroom suite with a custom colour.

We only see unsuccessful DIY repair attempts – which may give us a certain perspective – plus, we recognize the superior outcome when looking at at-home kits and the expert finish we provide.

Although certain minor bathroom problems can be handled yourself, such as unclogging a drain, most are best left to professionals.

This is due to our expertise to detect hidden issues before they escalate.

When a cast iron or pressed steel bath is made, it is covered in an exceptionally tough and robust layer of enamel.

This enamel coating is actually melted onto the bath in an intense heating process and solidifies as it cools to result in a sleek, polished look.

Of course! We will routinely repair any surface flaws as part of the tub reglazing service, but if you have isolated chips or cracks on an otherwise intact bathtub, we can still help.

Many of our clients reach out to us who have accidentally knocked tiles, heavy drain stoppers, or loose objects into the bath and chipped the surface.

Should this occur, rest assured, it is easily repaired!

Enquire about Availability and Get a Quote

Get in touch with The Bath Fixer now for a no-obligation quote and to book your appointment.

Get a Quote
CallCall Now QuoteFREE Quote