No matter if it's a slight blemish or a bath in need of full restoration, team Bath Fixer Tolworth specialize in a seamless repair for damaged sinks, showers, and tubs and revive old, cracked, or chipped surfaces using a economical solution instead of costly replacements.
Sinks, baths, and shower trays commonly experience impact damage due to dropping items on the surface. This can cause the surface to crack or chip, however, replacing your entire fixture isn’t necessary.
We are specialists in hard surface repairs, offering expert solutions for:
Shower Trays Repair
Laminate Flooring Repair
Kitchen Sinks Repair
Laminate & Veneer Repair
Wooden Frames Repair
Why Choose Bath Fixer?
Our skilled Bath Fixer technicians specialize in mobile surface restoration services covering doors, various flooring surfaces, solid and laminate worktops, enamel and acrylic tubs, shower bases, wall and floor tiles, window frames and cills, wood and composite furniture, and various additional fixtures in the Kingston-upon-Thames region.
Bath Repair Kingston-upon-Thames
Aged enamel-coated baths often get gritty and challenging to keep spotless due to wear and tear.
If your bath reaches this stage, it’s time for the professionals at Bath Fixer Tolworth to carry out our professional reglazing service.
Acrylic baths after years of wear lose their original shine, thus making your bathroom look tired.
Be it an a full reglazing of your enamel tub or a colour refresh for an acrylic tub, our team at Bath Fixer Tolworth, your like-new bath surface is guaranteed to remain pristine for many more years.
The Bath Fixer Tolworth team can rejuvenate the appearance of your tub at a fraction of the cost with our specialized bathtub refinishing and restoration.
Bath reglazing is an ideal fix for various bath materials, whether it's lightweight acrylic baths and traditional enamel-coated bathtubs to vintage cast iron bathtubs and reinforced fiberglass baths.
Our specialist process is suitable for any bath type, so we can resurface and reglaze all types of tubs and fixtures.
Be it repairing acrylic bathtubs to cast iron bath resurfacing, the finish will have your aged tub looking like new again.
Our professional bath reglazing solutions across Kingston-upon-Thames have saved our clients save more than 60 percent of the cost versus completely replacing the tub.
Through reglazing, we get rid of all the stains and scratches, and seal it with a high-quality enamel finish for an factory-fresh look.
Shower Tray Resurfacing Tolworth
Shower trays are often chosen for their budget-friendly nature and ease of installation, offering a practical feature for bathroom layouts.
However, over time, wear and tear can take its toll, giving them a dull and tired look and difficult to maintain.
This is where the expertise of Bath Fixer Tolworth comes into play, helping you avoid unnecessary spending of replacing your shower trays.
The trusted experts at Tolworth specialize in top-tier and hassle-free restorations, guaranteeing that your shower surface return to pristine condition.
From minor scratches to deep chips and stubborn stains, our team possesses the expertise and equipment to handle all types of damage, ensuring a polished, like-new finish.
What sets us apart is our commitment to quality and customer satisfaction. We stand behind our work, offering a guarantee on our shower tray repair services. This means you can trust us to deliver exceptional results every time, giving you peace of mind and confidence in the longevity of your shower trays.
FREE Quote
Request Form
Acrylic Tub Repair in Tolworth
Bath Fixer Kingston-upon-Thames specialists are specialists in seamless acrylic bath repairs, acrylic shower tray repair, full ceramic sink resurfacing, bath re-enamelling, and long-lasting surface restoration.
Acrylic bath surfaces are not as hard as other materials and may incur damage from accidents during bathroom renovations. At times a shower door to fall and scratch or gouge the bath. The bath’s edge can fracture if undue force is exerted or is leveraged when removing the panel. Frequently, an acrylic bath can be damaged in storage or transit.
No matter the damage, our experts can likely restore it.
Call us, or send us a quick message, or message us with a few photos, and we’ll offer professional recommendations.
Detailed Steps for Expert Bath Reglazing
Once on-site, our team shield the flooring, commode, sink, radiators, and any exposed surfaces.
Our team deep cleans the bathtub with high-quality bath-safe products and strip away moldy or damaged silicone.
We handle all bath surface repairs, including chips in the bath, surface marks, mineral deposits, and worn away enamel from hard water. For major wear and damage on the tub’s bottom, we repair that also.
We mask off the surrounding tiles, bathroom walls, water outlets, bath drain, and spillover outlet by applying precision masking to avoid any coating residue.
We use a special cleaning solvent to remove any grease, dust and particles, etc..
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Then we spray on the additional adhesion layer with a hot air gun.Where others may stop at one bonding layer, our process includes a double-bonding system, ensuring that the new enamel coating forms an ultra-durable bond.
We employ an professional-grade heat-curing process to cure the new enamel and remove the masking.
Following this, we perfect the final details, polishing, etc. to ensure a like-new appearance.
To complete the process, we add a fresh silicone seal so your bath is fully usable.
Hundreds of satisfied clients in Kingston-upon-Thames rave about our expert bath repair and bath resurfacing
services.
Good communication:
Good communication and a prompt arrival.
He clearly explained each step and began the work immediately.
He carefully masked all surrounding areas and put in a lot of effort.
Everything was spotless when he finished, and we’re extremely happy—the bath looks stunning.
- David E, Kingston-upon-Thames
Very Professional
Ilia provided top-notch service — worked efficiently, was polite, tidy, and the outcome was flawless.
I strongly recommend Ilia and the Bath Fixer team
—Sarah W., Tolworth, Kingston-upon-Thames
Timely and Transparent
Fantastic workmanship.
Called on Monday, and by Wednesday, Ilia was here as scheduled to fix two holes in my acrylic bath.
The process was seamless, with friendly and efficient service.
The colour match is spot on, making the repair virtually invisible.
Would not hesitate in recommending both the company & Ilia.
— Trent D. – Kingston-upon-Thames
Specialist uPVC Door Fixing
Bath Fixer Tolworth specialists, we prioritize maintaining the appearance and functionality of your vinyl-coated doors.
Our specialized fixing approach features seamless tone and finish correction, ensuring that the repaired areas blend seamlessly with the rest of the door.
We clean and prepare the damaged area, ensuring a smooth, even finish.
For everything from scratches to deep fractures, our specialized knowledge ensures a money-saving, green, and efficient repair option to installing a new door.
What Customers Ask Most About Our Services
Refinishing your bath can typically save you around 60% on the cost of buying a replacement bath.
Sure, you could replace your enamel bath for a budget-friendly plastic tub, but you’d be giving up an highly desirable item for a far inferior and weaker bath.
Yes. Our resurfacing solution is formulated to adhere to bathtubs, basins, sink pedestals, and even ceramic surfaces.
That being said, we suggest that the lavatory is changed, owing to the harsh cleaning process. Toilet brushes and harsh cleaners may cause premature deterioration.
You can resurface your full bathroom suite with a custom colour.
We only see the repair kits that did not produce a satisfactory result – which may give us a certain perspective – and we understand the gap in results when comparing a DIY repair kit and our high-quality refinishing.
Although certain minor bathroom problems can be handled yourself, such as unclogging a drain, it’s often wiser to call in the pros.
That’s because we have the experience to spot deeper concerns that could go unnoticed.
During the manufacturing of a cast iron or pressed steel bathtub, it is coated with an extremely hard and durable layer of enamel.
This hard-glazed enamel surface is fused onto the bath’s surface under very high temperatures and sets into a smooth, tough surface to result in a sleek, polished look.
Of course! We take care of any damage as part of the restoration treatment, yet, if your bath has small chips or damage on an otherwise good surface, we offer a targeted fix.
It’s common for homeowners to contact us who have had loose tiles fall, metal plugs, or various tools into the bath and caused small dents.
If this is the case, then don’t worry, our team can restore it seamlessly!
Find Out Our Availability and Get a Price Estimate
Reach out to The Bath Fixer today for a free consultation and to confirm scheduling options.
