Bath Fixer Bexley specialists are experts in seamless acrylic bath repairs, shower tray refinishing, ceramic basin restoration, bath re-enamelling, and hard surface repairs.
Acrylic baths are quite soft and may incur damage from falling tiles during tiling. Occasionally a shower guard to dislodge and leave a deep mark. The rim of the bathtub can fracture if excessive pressure is applied or is impacted when installing new fixtures. Frequently, an acrylic bath sustains damage before installation.
If your bath is chipped, cracked, or damaged, chances are we can fix it.
Call us, or send us a quick message, or message us with a few photos, and we’ll assess the damage.
Upon arrival, we lay protective sheets on the flooring, WC, sink, heaters, and all large surface areas.
We meticulously scrub the bath using industry-approved solutions and eliminate old, degraded sealant.
Our experts fix all types of damage, such as bathtub chips, cosmetic imperfections, calcium buildup, and faded, thin enamel layers. If there are holes or damage at the bottom of the bath, we repair that also.
We mask off the bathroom tiles, adjacent surfaces, faucets, waste, and overflow with masking to prevent spray getting on these.
Our team applies a high-strength degreasing solution to remove grimy deposits, surface contaminants, etc..
Then we spray on the second bonding agent with a hot air gun. Unlike other bath re enamelling companies we use two bonding agents so the enamel surface we spray on has a very strong hold to the original surface.
Next, we apply the second bonding agent with a hot air gun.Unlike other bath re-enamelling companies, we apply an extra adhesion layer, so the enamel surface we spray on remains securely attached for years to come.
We apply an professional-grade heat-curing process to harden and set the fresh enamel coating and unveil the fully restored bath.
We then do any detailed finishing touches, bringing out a smooth, high-gloss effect to achieve an impeccable result.
To complete the process, we add a high-quality sealing layer so the surface is watertight and secure.
Stone work surfaces can suffer minor damage on their edges, since this is where they are weakest.
The overhanging edges are particularly susceptible, and a hard object like a pot might lead to minor surface damage.
- Stubborn Stains on Worktops Even though they are highly durable, various harsh products have the potential to leave stubborn discoloration on these surfaces.
- Surface Marks and Indentations Accidental cuts, heavy impacts, or everyday activities could create faint abrasions or shallow marks on the worktop.
- Edge Damage The most exposed areas, under sudden pressure, are prone to minor fractures, disrupting the smooth finish.
